High Power Bi-Directional DC to DC Converter with excellent power - to - weight ratio.

• Optimized for a variety of applications.
• Battery Simulator Mode from 0 to 10 Ohms
• Primary side range: from 30 to 750Vdc, Secondary side range from 30V to primary side voltage - 10V (740V max.)
• Maximum transferred power secondary - primary: 120kW
• Scalable output by parallel operation
• Automatic Mode, Boost or Buck and boost only or buck only mode selection
• IGBT technology yields efficiency up to 96%
• Digital Control Interface via RS232 or Ethernet, hardware enable
• Recovery time less than 25ms. with output voltage regulation accuracy of 0.5% at 10 to 90% load change
• Temperature measurement and over temperature protection
• High voltage protection module available for secondary side
• Output current source or sink up to 400A (when secondary voltage is less than 320V)
• Constant power when above 320V on secondary side
• Measurement resolution: 0.1 Volt, 0.1 Amp
• Output current measurement accuracy 0.5 A +/- 0.5% of reading
• Output voltage accuracy 0.5V +/- 0.5% of set valueSelf diagnostics